There are the following methods for coloring plastic. Plastic coloring method and coloring suitability 1. Dry color coloring: Mix the dye pigment that matches the specified color with the primary color of the plastic and mold it. It is finished in the desired color at the end of molding. 2. Liquid color coloring: The usage is the same as dry color coloring, but dry color is in powder form, whereas this is in liquid dye pigment. Dry colors are prone to powder scattering, but this is not the case. 3. Pere coloring: The usage is the same as 1.2, but 1 is powder and 2 is liquid, while this is solid. Only dye pigment is solidified and made into liquid. With 1.2, the pigment adheres to the inside of the tumbler (machine for mixing materials and colors), and it must be washed at the end of the work, but this eliminates that effort and eliminates the worry of dye scattering. 4. Master colored pellet coloring/MCP: Commonly called master batch coloring. The usage is the same as 3, but 3 is made by solidifying only the dye pigment (MCP), but this is produced by concentrating the dye pigment (10 to 100 times) in the material, and depending on the magnification (if it is 10 times, material 10: MCP1), it is produced in the same way as 3. 5. Factory color coloring/FC: This is a completely different coloring method from 1 to 4, but it is the most commonly used coloring method, and it is a method in which the entire material is colored to the desired color by the coloring manufacturer mentioned above. Color stability and workability are the best, but the price is the highest among coloring methods, and the delivery time is the longest, taking 2 to 4 weeks. Plastic molding material coloring suitability Color stability Safety Price Delivery time Unit price (coloring/kg) MIN/LOT Material/kg Delivery after order 1 2040 1u/t 50 7 days 2 3050 1u/t 50 14 days 3 3050 20kg 500 14 days 4 20100 25kg 500 2030 days 5 50200 25kg 25 2030 days Coloring method by plastic molding material Resin name/coloring method Dry color Liquid color Pellet Master/MCP Factory/FC PSASABS MMA × × × × PPPE POM PC × × PA × × Other engineering plastics × × × × Selection and delivery time of plastic coloring ① Please prepare a color sample → ② Sample receipt, sample plate presentation → ③ Color decision, color number decision → ④ Order → ⑤ Delivery *The original sample that you want or specify is required. (Color cannot be specified using DIC.No. Munsell symbol only.) *After receiving the original sample, we will present a sample plate by our designated coloring manufacturer, and decide the color after receiving your approval. At that time, the color number will be decided at the same time. *Please specify your order using the material name and the color number decided at that time. Please refer to the delivery after the preceding suitability for the subsequent delivery time. Our partner plastic material coloring manufacturers Manufacturer name Factory location Aiwa Sangyo Co., Ltd. Sagamihara City, Kanagawa Prefecture Hexa Chemical Co., Ltd. Chiba, Osaka, Thailand Toyo Sangyo Co., Ltd. Misato City, Saitama Prefecture, Malaysia Kawai Co., Ltd. Kasukabe City, Saitama Prefecture PC Kasei Co., Ltd. Tokyo, Ibaraki Prefecture, Tochigi Prefecture Mokuren River City Please feel free to contact us. 0120-885-377 We are open 24 hours a day, 365 days a year.